Scientific production

New Frontiers of Construction Management, 277–289, 2025. by Grazia Marrone (Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano); David Masip Vilà (Department of Architectural Technology, Universitat Politècnica de Catalunya—BarcelonaTech (UPC)), Irene Rafols Ribas (Eurecat), Rocco Traini (Isopan) Abstract Despite the European Commission’s push for a faster energy transition, building renovation progress remains …

Off-Site Industrialized Systems for Building Renovation: Implementing Plug-and-Play Facades in the Construction Process Read More »

Sustainability Journal 2025, 17(5), 215.  (Special Issue Off-Site Construction: Challenges and Prospects for Supporting the Energy Transition) by Grazia Marrone (Department of Architecture, Built Environment and Construction Engineering, Politecnico di Milano); David Masip Vilà (Department of Architectural Technology, Universitat Politècnica de Catalunya—BarcelonaTech (UPC)), Irene Rafols Ribas (Eurecat), Marta Lupi, Rocco Traini (Isopan) and Maria Ibañez-Puy (Construcciones …

Assessing and Benchmarking a Multifunctional Plug-and-Play Façade for Building Renovation: Advantages and Limitations in the Construction Process Read More »

Journal of Design Facade and Engineering – Special Issue Multifunctional Façades for Renovation through Industrialization (Vol. 11, Número 2, pp. 71-97) by Massip, David, Rafols Ribas, Irene (Eurecat Technology Center), & Marrone, Grazia (MANNI Group). Abstract An immediate paradigm shift is needed to transform the deep renovation market for improved building performance and expanded energy …

Implementation of a multifunctional Plug-and-Play façade using a set-based design approach Read More »

Improved methodology for affordable, reliable deep building renovations Proceedings of the Sustainable Places 2021 (SP2021), Rome, Italy, 28 September – 1 October 2021 by J. van Oorschot (Zuyd University of Applied Sciences, Smart Urban Redesign Research Centre); M.S. Di Maggio (Huygen Engineers & Consultants; ABT); P. Op ‘t Veld (Huygen Engineers & Consultants); A. Tisov …

Boosting the Renovation Wave with Modular Industrialized Renovation Kits: mapping challenges, barriers and solution strategies Read More »

Improved methodology for affordable, reliable deep building renovations Proceedings of the SBE Regional Conference “Innovations for the Urban Energy Transition” (SBE22DELFT), The Netherlands, October 2022 by M. Orova and A. Reith (ABUD Mérnökiroda Kf; Marcel Breuer Doctoral School of Architecture, Faculty of Engineering and Information Technology, University of Pécs)  Abstract European Union energy efficiency goals …

Improved methodology for affordable, reliable deep building renovations Read More »

Optimised IES-VE model calibration methodology integrating IoT, smart meter and BMS data Proceedings of the eSIM 2021 Conference, Online, 14-16 June 2021 (Session A-3: Parallel Session A-3 (Simulation in Practice)) by Adalberto Guerra-Cabrera  (Integrated Environmental Solutions, Research & Development, Glasgow, UK) Ruth Kerrigan (Integrated Environmental Solutions, Research & Development, Dublin, Ireland) Abstract In this paper, …

Optimised IES-VE model calibration methodology integrating IoT, smart meter and BMS data Read More »

Computer Vision-based Reader for analogue Energy/Water Meters in low-cost embedded System: a Case Study in an Office Building in Scotland Proceedings of the 12th Nordic Symposium on Building Physics (NSB 2020), 7-9 September 2020 by Adalberto Guerra-Cabrera; Giulia Barbano (Integrated Environmental Solutions, Research & Development, Glasgow, UK) Giovanni Tardioli; Girish Mallya Upudi (Integrated Environmental Solutions, …

Computer Vision-based Reader for analogue Energy/Water Meters in low-cost embedded System: a Case Study in an Office Building in Scotland Read More »